Gateway Multifunções VoIP Dinstar UC100-2O

Gateway Multifunções VoIP Dinstar UC100-2O

119.00 

O Gateway VoIP Dinstar UC100 2O é um Gateway Multifunções analógico que interliga serviços de telefonia IP e linhas analógicas. O dispositivo tem duas portas FXO, integra um Router NAT de alta velocidade, uma porta WAN 10/100Mbps e 3 portas LAN 10/100Mbps, podendo assim partilhar ligações à Internet com dispositivos locais.
O Gateway VoIP UC100 suporta o protocolo SIP e é compatível com as plataformas IMS/NGN e sistemas de telefonia IP baseados em SIP. É ideal para pequenas e microempresas que precisam de excelente qualidade de voz e serviços avançados de telefonia.

• 2 Portas FXO
• Funcionalidades de Central telefónica
• Suporta 8 Chamadas em Simultâneo
• Suporta 32 Extensões SIP
• WiFi Hotspot

Em stock (pode ser encomendado sem stock)

REF: UC100-2O Categoria:

Descrição

Physical Interfaces

– 2 FXO – RJ11
– 1 WAN 10/100 Base-T RJ45
– 3 LAN 10/100 Base-T RJ45
WiFi (Opcional):
– 2.4GHz 802.11b/g/n,2T2R

FXO

Connector: RJ11
Caller ID: FSK, DTMF
Polarity Reversal
Answer Delay
Busy Tone Detection
No Current Detection

Supplementary Services

Call Forward (Unconditional/No Answer/Busy)
Call Waiting
Call Hold
Call Transfer
Hotline
Do-not-disturb
Three-way Conference

Environmental

Power Supply: 12VDC, 1A
Power Consumption: 10W
Operating Temperature. 0 ℃ ~ 45 ℃
Storage Temperature: -20 ℃ ~80 ℃
Humidity: 10%-90% Non-Condensing
Dimensions (W/D/H): 126×75×25mm
Unit Weight: 0.7kg

Voice Capabilities

VoIP Protocols: SIP over UDP/TCP,SDP,RTP
Codecs: G.711a/μ law,G.723.1, G.729A/B
Silence Suppression
Comfort Noise Generator(CNG)
Voice Activity Detection(VAD)
Echo Cancellation: G.168 with up to 128ms
Dynamic Jitter Buffer
Adjustable Gain Control
Call Progress Tones: Dial Tone, Ring Back Tone, Busy Tone
T.38 and Pass-through
NAT: STUN/UPnP
DTMF: RFC2833/SIP Info/In-band

Network Features

Protocols:TCP/IP/UDP,RTP/RTCP, ARP/RARP, ICMP, NTP/SNTP, DNS/DDNS,FTP, Tracert, Nslookup
Network Mode:Bridge/Route
HTTP/HTTPS
PPPoE
DHCP Server/DHCP Client
Port Mapping
Firewall
Telnet/SSH
PPTP/L2TP/OpenVPN Client
DMZ,Hosts
Static Route
Wi-Fi Authentication:
WEP,WPA+PSK, WPA2+PSK

IPPBX Functions

Ring Group
Paging Group
Routing Groups
Caller/Called Number Manipulation
Routing Based on Time Period
Routing Based on Caller/Called Prefixes
Routing Based on Source Trunks
Dial Rules
Failover Routing
Customization IVR
Auto Attendant Function
CDRs

Maintenance

Web GUI Configuration
Telnet Management
Configuration Restore/Backup
Multiple Languages Supported
HTTP/TFTP/FTP Firmware Upgrade
Auto Provision
CDR Report and Export
Syslog
Ping and Tracert
Traffic Statistics: TCP,UDP,RTP
Network Capture
NTP

Informação adicional

Peso 0.7 kg